Skip to content
ALPENSATTEL
0
Back to Blog
2026

Thermal Gloves for Biking: What Really Helps Against the Cold (2026)

Sigi · · 5 min read

Thermal cycling gloves 2026: what thermal means, which construction keeps you warm and which model suits which temperature.

Thermohandschuhe Fahrrad: Was wirklich gegen Kälte hilft (2026) - Alpensattel
In this article

Thermal gloves with insulation, wind protection and the right size help against cold hands – choose them by temperature and weather. At 0 to 10 °C, the Premium Thermal Bicycle Gloves 3.0 are enough; for frost, rain and snow, go with the PolarTherm Winter Gloves 2.0. All models: Bicycle gloves.

What does thermo mean for cycling gloves?

Thermo describes a glove that stores warmth and slows heat loss to the outside. The term is not an official standard, so the name alone says little about performance.

A good thermal glove does three jobs at once:

  • Insulation: material that stores warmth
  • Wind protection: an outer layer that blocks the wind you ride into
  • Breathability: moisture escapes, so sweat doesn't become a source of cold

Cheaper models often optimize only one of these points. Why wind protection matters so much is explained in Why windproofing is more important in cycling than you think.

Which thermal glove suits which temperature?

Choose the glove for the coldest temperature you regularly ride in. Wet weather changes the choice: in constant rain you need a waterproof glove, no matter how warm it is.

Temperature Weather Glove
0 to 10 °C dry to drizzle Premium Thermal Bicycle Gloves 3.0
0 to –10 °C frost, rain, snow PolarTherm Winter Gloves 2.0
any temperature constant rain PolarTherm Winter Gloves 2.0

What is a good thermal glove made of?

Good thermal gloves work with three layers: an inner lining, insulation and an outer fabric that keeps out wind and moisture. On top of that come details designed for cycling.

Inner lining: warmth from the start

You feel the inner lining first. It traps still air, and exactly this air keeps the warmth at your hand. Both Alpensattel models have ThermoCore Fleece inside, 15 % thicker than on the predecessor.

Insulation: keeping the warmth

In frost, a separate insulating layer between lining and outer fabric counts. The PolarTherm Winter Gloves 2.0 insulate in the middle layer with 3M Thinsulate.

Outer fabric: blocking wind and moisture

On the bike, the wind you ride into blows the warm air away from your hand. A wind- and water-repellent outer fabric keeps it out; in rain and snow you need a waterproof layer. The PolarTherm are 100 % waterproof with an 8.000 mm water column, while the Thermo 3.0 are wind- and water-repellent.

Details for cycling

Touchscreen areas on thumb and index finger let you use your phone and navigation device without taking your gloves off. A non-slip coating on the inner hand gives you grip, even in the wet, and reflective strips on the back of the hand add visibility. Both models have all three details.

Which thermal gloves does Alpensattel offer?

Two models cover the winter: the PolarTherm for frost and wet weather, the Thermo 3.0 for the cool days up to 10 °C. Both come in black and yellow, in sizes S to XXXL.

PolarTherm Winter Gloves 2.0: for frost, rain and snow

  • Warm down to –10 °C
  • 100 % waterproof, 8.000 mm water column, windproof and breathable
  • Cuff 2 cm longer, with hook-and-loop closure
  • For 0 to 10 °C, the Thermo 3.0 is the better choice

Premium Thermal Bicycle Gloves 3.0: for 0 to 10 °C

  • Warm from 0 to 10 °C
  • Wind- and water-repellent, breathable
  • ThermoCore Fleece, 15 % thicker than on the predecessor
  • Not waterproof in constant rain
  • Too thin for sub-zero temperatures
Our recommendation PolarTherm Winter Gloves 2.0
4,8 (376)
  • Temperature: down to –10 °C
  • Insulation: 3M Thinsulate + ThermoCore Fleece
  • Thickness: 15 % thicker than its predecessor
49,97€69,97€
View now PolarTherm Winter Gloves 2.0

30-day risk-free trial

Why do your hands get cold so fast when cycling?

When you cycle, your legs do the work, while your fingers only hold the handlebar and produce hardly any warmth of their own. Add wind and wet weather, and the warmth is gone fast.

You'll find more tips against cold fingers in Cold fingers while cycling. If your fingers stay numb or discolored despite warm gloves, have it checked by a doctor.

Are heated gloves worth it?

For most rides down to –10 °C, a well-insulated thermal glove is enough, no battery needed. Heated gloves can be worth it if you ride for a long time in severe frost. You'll find the comparison in Heated cycling gloves or thermal gloves.

Which size do you need?

The glove should fit snugly without pressing: air at the fingertips cools you down, and compressed fleece hardly keeps you warm. Both models come in S to XXXL. How to measure your size is covered in Cycling gloves: which size fits?, tips for wide hands in Men's winter gloves, for narrow hands in Winter cycling gloves for women.

Cycling gloves for winter and summer

At a glance

Benefits when you order from us

Free shipping in 1–3 days

Try it risk-free for 30 days

30-day right of return

Mounting in minutes

Frequently asked questions

What does thermal mean for cycling gloves?

Thermal means a glove stores warmth and slows heat loss to the outside. The term isn't a fixed standard, so construction, wind protection and fit matter more than the name.

How warm are the Premium Thermal Bicycle Gloves 3.0?

The Premium Thermal Bicycle Gloves 3.0 keep you warm at 0 to 10 °C. They are wind- and water-repellent, breathable and have ThermoCore Fleece on the inside. For temperatures below freezing, the PolarTherm Winter Gloves 2.0 are a better fit.

Which glove keeps you warm in frost and rain?

The PolarTherm Winter Gloves 2.0 are built for frost down to –10 °C and wet conditions. They are 100 % waterproof, windproof and breathable, with ThermoCore Fleece on the inside and 3M Thinsulate in the middle layer.

Are thermal gloves waterproof?

Not automatically. The PolarTherm Winter Gloves 2.0 are 100 % waterproof, while the Premium Thermal Bicycle Gloves 3.0 are water-repellent: drizzle beads off, but in continuous rain water can get in.

What is the difference between PolarTherm 2.0 and Thermo 3.0?

The PolarTherm are built for frost and wet conditions: warm down to –10 °C, waterproof and with additional Thinsulate insulation. The Thermo 3.0 cover 0 to 10 °C and are wind- and water-repellent. Both have touchscreen areas, an anti-slip coating and reflective strips.

Why do my hands get cold so quickly when cycling?

Your fingers only hold the handlebar and produce hardly any heat of their own, while wind and moisture carry the warmth away. A windproof glove with insulation helps, as do warm hands before the ride. If your fingers stay numb or discolored for a long time, have it checked by a doctor.

Are heated gloves worth it?

For most rides down to –10 °C, a well-insulated thermal glove without a battery is enough. Heated gloves can be worth it on long rides in severe frost.

What size do I need for thermal gloves?

The glove should fit snugly without pressing, because air at the fingertips cools them down. Both Alpensattel models come in sizes S to XXXL; how to measure is explained in Cycling gloves: which size fits?.

Which gloves suit you? 4 questions, your model and your size Start quiz
Cart
Your cart is reserved for 05:00 min
Shipping
2,90€
Total
2,90€
Your 10% cashback 0,00€
30-day return policy
2 years warranty
Cart
Your cart is empty
Legal
Hey, looks like you're visiting from !